web analytics

Rom Firmware

Download All Android Mobile Firmware Rom & Flash File

How to Flash Stock ROM Using LiveSuit Application Tool

These are Complete Installing instructions to Flash Stock ROM Using LiveSuit Application on Any Android Supported Devices.

Before Flashing Requirements: Your Smartphone must have at least 40 to 50 percent of Device battery to perform the Full Installation Process.

How to Use LiveSuit Application Tool to Flash Stock ROM

Step One: Download and Install Latest Available Android ADB USB Drivers on your PC.

Step Two: Download and extract LiveSuit Application Tool on your PC. After Extracting The Software Zip File, you will be able to see File Like Below Screen Window:

Step Three: Now Press the LiveSuit.exe from the extracted files.

Step Four: Once LiveSuit.exe is Launch, Choose Yes Option to follow the Upgrade Wizard.

Step Five: Then, Choose Upgrade Mode which is General and Mandatory. Click on the Mandatory Option to continue.

Step Six: After Then, Unplug All connected Android or Other IOS Devices & tablets from the PC (if your Device already connected), Select Yes button Option to Continue.

Step Seven: Next Step, You have to select the .img Stock ROM. If you are ready Click on The Yes Button Option and choose the Firmware File.

Step Eight: After Then, Don’tClick on Finish Button Option.

Step Nine: Now, It’s time to connect your Smartphone Device or Tablets to the PC using USB Data Cable. Before Connecting your Phone, Confirm That its Power Off.

Then, Connect USB Data Cable to the PC & your Smartphone Device Press & Hold Volume Down Button and Connect the USB Data Cable to it. While holding Down Volume Down Button immediately Press The Phone Power Key for 10 times, so that the PC can recognize your Device.

Step Ten: Once your Smartphone is Perfectly recognized by your PC, you able to see the below Screen Window saying to Mandatory Format the Phone. Press Yes to Continue.

Step Eleven: Now, Press Yes Button option Again to continue.

Step Twelve: Now LiveSuite will Run the Installing process (this procedure will take up to 5 minutes to Finish (Flashing Process).

Step Thirteen: Once the Installation process is Finish then you will be able to see Upgrade Succeeds in Pop-up Window line Below Screen Shot. Click OK to Exit.

Step no 14: Now, Close The LiveSuit Application Tool by Pressing the Close Button.

Step Fifteen & Last: Disconnect your Smartphone from the Computer and Restart it.

Congratulations, Your Android Smartphone get The latest Stock ROM using LiveSuit Application Tool.

Rom Firmware © 2017